SensorSim
Break your firmware.
On purpose.
SensorSim generates sensor signals on demand, so you can inject a fault or an edge case and see how the firmware copes, without the real sensor and without breaking it.
SensorSim is in development. Add it to your quote to reserve an early-access unit, and we’ll confirm the delivery date.

The failures you can’t wait for.
On demand.
A sensor that dies in the field, a wire that comes loose on a vibrating machine, a reading that makes no sense. You can wait months for these, or schedule them for every commit.
No real sensor needed. Test the firmware before the sensor arrives, or when it is too expensive to break.
Fault detection, isolation, recovery. Prove that FDIR logic does what the safety case says it does.
Edges, not averages. The minimum, the maximum and the impossible, exactly when you want them.
Pick a fault.
Watch the firmware handle it.
Every scenario is defined, not improvised, so a failing test fails for a reason you can name.
The signal disappears, like a broken wire.
The reading freezes while the world keeps changing.
A short, impossible jump in the middle of normal data.
Values beyond what the sensor can legally report.
A reading that creeps away over minutes, not milliseconds.
Combined with CoreUnit power control: the rail sags while the sensor lies.
The same scenario,
every single time.
A simulated sensor does exactly what the scenario says, at exactly the same moment, on every run and every unit. Here the firmware raises its fault flag for each injected fault, drops the OK light, and recovers when the signal does.
Reproducible. Identical inputs on every run, so a regression is a regression, not noise.
Scripted from CI. Run fault-injection scenarios on every commit, next to your other tests.
Real and fake, together. Mix simulated signals with real ones from SensorHub in one scenario.
Stacks on a CoreUnit.
Nothing else to install.
The module sits on top of a CoreUnit and shows up in the same dashboard, the same API and the same booking. One stack per device under test.
Tech specs
Full specifications come with the first production units. Tell us which sensors you need to simulate; early-access requests shape the first batch.
SensorSim questions
Anything else? Email the team.
Do I need a CoreUnit?
Yes. SensorSim stacks on a CoreUnit, which connects it to the dashboard and your tests.
Which sensors can it simulate?
SensorSim is in development, so the list of signal types, ranges and protocols is not final yet. Tell us which sensors you need to simulate, and we will tell you whether the first batch covers it.
Can it run in CI?
Yes. WisentWire is API-first and CI/CD ready, so fault-injection scenarios can run on every commit.
Find the failure
before your customer does.
Reserve SensorSim in your quote, or book 30 minutes with an engineer and walk through your fault scenarios.
Add SensorSim
Early access price on request
- Stacks on any CoreUnit
- Fault scenarios from the dashboard, API and SDK
- Pair it with SensorHub for hybrid tests
- Onboarding from our engineers
Book a 30‑min live demo
Free, with one of our embedded engineers
- Inject a fault into a real board, live
- Walk through your FDIR requirements
- Plan a hybrid setup with SensorHub
- Questions answered by the people who built it



